10-50mm New Manual Electric Screw Capper Plastic Bottle Capping Machine 220V
Free Shipping Included! 10-50mm New Manual Electric Screw Capper Plastic Bottle Capping Machine 220V by cjc at Jesolo Wants ADSL Back. Hurry! Limited time offer. Offer valid only while supplies last. How to use 1. Put Chuck onto the Cap to be tightened 2. Push down switch to active the Capper 3. The Capper starts and tightens the cap 4. The Capper
1. Put Chuck onto the Cap to be tightened
2. Push down switch to active the Capper
3. The Capper starts and tightens the cap
4. The Capper automatically shuts off while reaching the pre set torque
Attention: As the above picture shows, if your cap size are different within the range, then you can use the machine directly. If the differences of your cap size are too big, then you will need to change the accessories according to your requirement. For example, one cap is 15mm, another one is 25mm, then you will need to change the Silicone pad (four white pads showed in the pic). If one cap is 15mm, another one is 35mm, then you will need to change the aluminum head(two silver heads showed in the pic) and the silicone pad as well. This machine is only for 220 V, if you need 110 V, you need to buy a voltage transformer in addition.This tool is mainly used for the unscrewing and tightening of kinds of screw cap.
Features & Highlights
- This kind of hand-held electric Capping Machine is easy to carry and operate, can be easily used to tighten, loose, or spin a variety of screw caps. The adjustable clutch can effectively avoid the cap damage and reduce the wear and tear inside the plug. Once the cap is fully tightened, the machine automatically stops rotating head that you can cap the next operation.
- Power: 80 W , Voltage: 220V/50Hz ,Working Method: Electric Capping
- Operate Type: Handheld,Cap diameter: 10-50 mm
- Capping speed: 30-90 bottles / min (Differs from people to people)
- Dimension: 7 x 7 x 30 cm,Machine weight: 1 kg
|Package Weight:||4 pounds|
|Package Size:||3.94 x 3.94 x 3.94 inches|