40W 50W CO2 Laser Power Supply for CO2 Laser Engraver Cutter MYJG-50 110V / 220V
40W 50W CO2 Laser Power Supply for CO2 Laser Engraver Cutter MYJG-50 110V / 220V by COLE at Jesolo Wants ADSL Back. MPN: PS-MYGJ-50. Hurry! Limited time offer. Offer valid only while supplies last. Specifications: Input Voltage: 100V-AC230V AC frequency: 47-440HZ Max Input power: 440W Max Input current: 3A Max output voltage: DC 22KV Max
- Input Voltage: 100V-AC230V
- AC frequency: 47-440HZ
- Max Input power: 440W
- Max Input current: 3A
- Max output voltage: DC 22KV
- Max output current: DC 22mA
- Efficiency greater than or equal to 90%(Full load)
- MTBF greater than or equal to 10000 Hours
- Response speed less than or equal to 1ms(Time from the TTL Signal is given to the output current up to 90% pre-setting current)
- Withstand Voltage: Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure.
- Environment Operating temperature:(-10-40)degree
- Celsius,Relative humidity: less than or equal to 90%
- Cooling: Forced air cooling (fan cooling)
- TH: Input Signal, Switch Light Control,High Level(greater than or equal to 3V)-Bright dipping,Low Level(less than or equal to 0.3V)-No Light Dipping
- TL: Input Signal, Switch Light Control.High Level-No light Dipping,Low Level(less than or equal to 0.3V)-Bright Dipping
- 3WP*1: Input Signal, Switch Light Control,High Level(greater than or equal to 3V)- No light Dipping,Low Level(less than or equal to 0.3V)-Bright Dipping
- G :Signal Ground, The foot must connected with laser machine's enclosure and ground properly.
- IN*2 :Input Signal, Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control 6 5V Output Power 5V,Max output Current 20mA
- Expedited Shipping 4-5 wroking days from China to USA by DHL, Fedex or UPS.
Features & Highlights
- Good compatibility: it can be applicable to 50W laser tube manufactured by various factories.
- Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
- Easy control: the start and stop of laser can be easily controlled by TTL level.
- The power supply has output open circuit protection.
- The power supply has TTL signal indication, water through signal indication and laser output indication.
|Item Size:||5.51 x 3.15 x 3.15 inches|
|Package Weight:||2.82 pounds|
|Package Size:||7.87 x 6.69 x 6.69 inches|